上海赛飞航空线缆制造有限公司招聘

Main Function Responsibilities and Activities / 本职位的主要责任以及职能:
Control the product realization process / 生产实现程序的控制
？ Assure shipment of a product which meets the customer requirements, SHIP A PRODUCT FREE OF DEFECTS / 确保产品的发货达到客户要求，确保无不合格品的输出。
？ Assure the product-process control according to the customer and company specifications / 根据客户与公司的规范确保产品 - 工艺的管理控制。
？ Define, monitor and evaluate the effectivity of quality plans and practices / 定义，监控评估质量方针及其付诸实践的效力。
？ Implementation and follow-up of the 10 steps methodology / 实施及跟进十步走方法论。
Manage the corrective and preventive action process / 管理纠正及预防措施的程序
？ Document and follow-up internal and external corrective actions / 起草与跟进内部和外部纠正措施。
？ Verify the effectiveness of the corrective actions implemented / 确认已实施纠正措施的效力。
？ Maintain the CA/PA system for internal and external quality / 维护CA/PA体系以确保内部与外部质量。
Communicate with the external customer / 与外部客户的沟通交流
？ To be the official contact with the customer regarding product quality issues / 作为客户方关于质量问题的官方联系人。
？ Validate and send answers to customer complaints / 验证客户投诉并作出反馈。
？ Ensure that all analysis and action plans for customer, internal and external audits and any other CA/PA type are adequate to address the reported conditions / 确保所有客户方，内部与外部审核的分析以及行动计划，以及其他CA/PA类型都与汇报的情况相吻合。
Manage the transition/introduction of new products / 管理新产品的流转及引入
？ Develop, implement and maintain the company FAI process to ensure failure free transference and introduction of new product lines or processes / 开发，实施与维护公司首件检验工艺以确保无不合格品的流转及新生产线或新工艺的引入。
？ Validation of new components and tools as required / 根据需要，验证新的部件与工具。
Manage the documentation and records control process / 管理文件与记录的控制程序
？ Generate, review, implement and maintain IMS documentation of quality department, work instructions, formats etc / 创建，评审，实施与维护质量部门IMS的文件，工作指导说明，表格等。
？ Review and approve technical and performance specifications, quality documents and procedures / 评审与批准技术与性能规格，质量文件与流程。
Manage the training process / 管理培训程序
？ Provide on the job training as needed on quality criteria, customer complaints, etc / 根据需要在质量标准，客户投诉方面提供职业培训。
？ Co-Lead with process engineering team, as required to develop/update/improve training modules and support for trainers / 根据需要与工艺工程团队一起领导开发/更新/改进培训模块，并为培训师提供支持。
Support material acquisition/receiving inspection process / 为材料购买/验收检查程序提供支持
？ Provide effective feedback to receiving inspection process about the quality of supplied parts / 为所供应的零件实施验收检查程序，并提供有效质量反馈。
？ Support on components FAI process to receiving inspection as required / 按照要求为部件的FAI 程序到验收检验程序提供支持。
Manage the continous improvement process / 管理持续改善程序
？ Actively support the company continuous improvement initiatives / 积极为公司持续改善程序提供支持。
？ Define and provide the required resources to meet the continous improvement objectives / 定义与提供所要求资源，以达成持续改善目标。
？ Lead continuous improvement projects to reach established goals and go beyond / 领导持续改善项目以完成或超额完成既定目标。
Manage the audit process / 管理审核程序
？ Perform internal audits (process and product) / 实施内部审核（程序与产品）。
？ Feedback to the internal auditor to the continuous improvement of the product and process internal audit / 为产品与工艺持续改善的内部审核向内审员提供反馈。
？ Be active internal auditor to support the company’s internal audit process / 踊跃成为内部审核员以支持公司的内审程序。
？ Support and attend all required audit (customer, internal, external, etc.) / 按照要求参与所有的审核活动并提供支持。（客户，内部，外部审核等）。
Manage and support to the program / 项目管理与支持
？ Collect, analyze and oversee data entry on relevant quality performance indicators / 收集，分析相关质量绩效指标并监督其数据输入。
？ Supervise the performance of the assigned Quality Inspectors / 监督指定质检员的工作绩效。
？ Coordinate inspection support, overtime, vacations, absence and flexibility changes between production lines with the Production Manager / 为生产线与生产经理之间提供监督支持，例如对生产，如人员的加班工作时间，休假，缺席以及弹性工作时间的监督。
？ Verify status of program shipping requirements to update priorities and action items / 验证项目出货状态及要求，以更新工作重点及轻重缓急。
REQUIRED SKILLS AND EXPERIENCE / 本职位所要求的技能及经历:
Bachelor degree from university / 大学学历。
Industrial Engineering career or equivalent / 工业工程领域工作经验或同等经历。
3 to 5 years experience in Quality position in a manufacturing environment / 3-5年制造业环境质量岗位工作经验。
Experience working under ISO 9001 or AS9100 quality systems and environmental systems / 具有ISO 9001或AS 9100质量体系或环境体系工作经验。
Experience performing component level and product level FAI process / 曾参与部件与产品首件检验程序经验。
Experience defining and performing continuous improvement projects / 定义与实施持续改善项目经验。
AS9100, ISO 9001 quality systems management at product manufacturing level / 与产品制造有关的AS 9100，ISO 9001质量体系管理经验。
Problem solving and planning techniques such as 8D’s, APQP, PPAP, PFMEA, etc / 解决问题与规划技术如8D, APQP, PPAP, PFMEA,等。
Excellent project management skills / 卓越的项目管理技能。
Fluent English writing and speaking proficiency / 英语流利的书写及熟练的听说能力。
People administration / 人员的管理。

Main Function Responsibilities and Activities /本职位的主要责任以及职能:
? Define, document and maintain configuration and change management processes (PM level)/定义,记录和维护构型和更改管理流程（项目级）
? Coordination with customer on configuration and change management, including impact (schedule and cost) and change cost tracking /与客户进行构型和更改管理协调，包括影响（进度和费用）及更改费用的跟踪。
? Setting up change impact assessment internally and externally via CCB meeting, managing related coordination record /通过组织CCB会议进行内/外部的更改影响分析，管理相关协调记录
? Managing ECR/ECP, tracking the implementation of changes, providing change implementation status report/管理ECR/ECP，跟踪更改实施状态,提供更改实施状态报告
? Supporting on engineering changes price negotiation (both ENG and MFG)/对工程更改价格谈判给予支持（包括工程和制造）
? Other duties may be assigned /其它指派的工作
REQUIRED SKILLS AND EXPERIENCE / 本职位所要求的技能及经历:
? Bachelor’s degree in Engineering; or equivalent combination of education/工程相关学士学位，或同等教育背景
? 5 years’ experience in aviation industry or equivalent / 在航空或相关领域有五年的工作经验
? Designer /manufacturing engineering/Industrial Engineering /quality or Configuration Engineering background. / 设计/制造工程/工业工程/质量或构型工程师背景
? Familiar with ISO Quality System and AS9100 / 了解ISO质量系统和AS9100标准
? Good at speaking and written English / 良好的英语口语和书面表达能力
? High skilled in computer, including Project, EXCEL, PPT etc/具有熟练计算机应用技能，包括project，EXCEL，PPT等
? At least 1 year of experience in configuration management activity / 至少一年构型管理活动经验
? Basic knowledge of configuration management in Aviation/Avionics preferred / 具备航空/航电构型管理基本知识优先

RESPONSIBILITIES AND ACTIVITIES /责任与活动：

1. 熟悉生产现场看板物料运作和管理的知识，能支持IE完成物料看板盒的创建和管理。/ Familiar with the operation and management of Kanban materials on the production site, able to support IE in creating and managing material Kanban boxes.

2. 熟悉生产现场工具管理的知识，能支持IE完成工具看板的创建和管理。能根据工具需求对现场工具进行配置。/ Familiar with knowledge of Tool management on production site, able to support IE in creating and managing Tool Kanban. Can equip on-site tools based on Tool requirements.

3. 具备5S基本知识，能支持IE对现场看板物料、工具、工装等进行5S管理，制作和维护定位标识。/ Equipped with basic knowledge of 5S, able to support IE in 5S management of on-site Kanban Materials, Tooling, Fixtures, etc., create and maintain positioning labels.

4. 具备ERP系统基本知识，能支持IE在ERP系统维护标准工时和工艺路线。/ Have basic knowledge of ERP system and be able to support IE to maintain standard working hours and Routings in ERP system.
REQUIRED SKILLS AND EXPERIENCE / 本职位所要求的技能及经历:

1、Major in Engineering (Industrial/ Manufacturing/Electrical/
Mechanical/Aerospace), or equivalent engineering degree / 工程类专业（工业 / 制造 /电气 / 机械 / 航空领域）在读

2、Second year or third year of college is preferrable 大二/大三在读为佳

Must-own skills/knowledge / 必须具备的技能或知识:
（1）根据审核后的原始凭证收付现金及银行存款；对相应的原始凭证做账务处理，完成应收应付附表/ Collect and pay cash and bank deposits based on the reviewed original vouchers; Perform accounting processing on the corresponding original vouchers and complete the detailed data of accounts receivable and payable;
（2）负责相关费用的摊销及预提/Responsible for the amortization and provision of related expenses
（3）严格按照公司规定审核日常费用和报销费用/Strictly review daily expenses and reimbursement expenses in accordance with company regulations
（4）按照规定办理银行收付款业务，支付海关关税，申请非贸备案/Handle bank payment and receipt business according to regulations, pay customs duties, and apply for non trade registration
（5）负责收集银行有关单据，及时签发给相关人员并进行账务处理，并每月发送付款及时率/Responsible for collecting bank related documents, issuing them to relevant personnel timely and conducting accounting processing, monitoring fund flow and send payment rate every month
（6）负责各项往来账款的清理与催收, 并定期与相关单位部门核对/Responsible for clearing and collecting various accounts receivable and payable, and regularly verifying with relevant departments
（7）负责销售开票日常，在系统中确认销售收入，核销对应的收入/Responsible for daily sales invoicing, confirming sales revenue in the system, and verifying corresponding revenue
（8）根据外汇收入整理资料提供给银行，在外汇收入系统确认申报/ Organize data based on foreign exchange earnings and provide it to the bank for confirmation and declaration in the foreign system
（9）梳理工作中制度的缺陷和漏洞，及时进行修改/Sort out the defects and loopholes in the system in the work, and make timely modifications
（10）配合内外部审计工作以及与银行的沟通/Cooperate with internal and external audit work and communicate with the bank
（11）领导安排的其他工作/Other tasks arranged by the leader
岗位要求/ Job requirements：
（1） 专科及以上学历，中级会计证优先
College degree or above, intermediate accounting certificate is preferred
（2） 1年以上应收应付工作经验
More than 1 year of working experience in APAR
（3） 熟悉Excel、SQL，会使用LN系统优先
Familiar with Excel, SQL, can use LN system is preferred
（4） 能接受一定的加班工作量
Accept a certain OT
（5） 良好的团队协作能力和沟通能力，有自己独立的思考和探究能力，适应变化能力强
Good teamwork and communication skills, independent thinking and exploration ability, and strong ability to adapt to changes
（6） 具备英语听说读写能力
English listening, speaking, reading and writing skills
外包时间：6个月

Main Function Responsibilities and Activities / 本职位的主要责任以及职能:

1、 Perform assigned tasks meeting the organization's expectations for quality, schedule and process compliance. / 完成分配到的任务，以达到组织期望的与质量目标，日程计划表以及程序的一致性。

2、 Develops solutions to complex problems, which require ingenuity and innovation. / 需具备***性与革新性，以制定应对繁复难题的解决方案。

3、 Determines the staffing and equipment necessary for production rates and capacities / 确定为达成生产率与生产能力所必需的员工与设施。

4、 Execute systems that increase productivity by improving the integration of people, materials and equipment /实施通过促进整合人力，材料，与设施来提高生产力的体系。

5、 Assess space and capacity of facilities based on volume to determine utilization rates and recommend any necessary adjustments to footprint. / 评估设备使用空间及其容量，以决定其利用率，如有必要可调节设备的尺寸。

6、 Prepares detailed technical work instructions including Manufacturing Bill of Materials / 监察技术的详细指导说明，包括制造材料单。

7、 Evaluates the impact of engineering change notices planning its implementation while maintaining and recording configuration / 评估工程更改通知，规划实施的同时维护及记录其配置。

8、 Researches continuous improvement through the application of Six Sigma, Lean Manufacturing, 5S, and other related Industrial Engineering concepts / 研究通过六西格玛，精益生产，5S 等其他相关工业工程管理理念的应用来实现
公司的持续改善。

9、 Recommends modifications to designs to address manufacturability and ensure proper assembly sequencing. / 可适当对设计提出修改建议，以达到产品的可制造性，确保其合理的装配顺序。

10、 Lead or participate in trouble shooting of existing and new processes. / 可指导或参与现有程序或已用程序的疑难解答。


11、 Create and maintain process documentation. Train personnel as it relates to process documentation and procedures / 创建与维护程序文件。培训与程序文件和程序步骤相关的人员。

12、 Other duties may be assigned. /其他被分配到的职责。

REQUIRED SKILLS AND EXPERIENCE / 本职位所要求的技能及经历:

1、Bachelor’s degree in Engineering (Industrial/ Manufacturing/Electrical/
Mechanical/Aerospace), or equivalent engineering degree / 工程学学士学位（工业 / 制造 /电气 / 机械 / 航空领域），或工程专业同等学位。

2、3 years of experience in an engineering classification / 三年工程类工作经验。

3、2 years Manufacturing Engineering Industry (electrical wiring industry preferred) / 两年制造工程领域的经验 (电气线束领域经验更佳)。

4、 Fluent in English (Written and verbal) required / 流利的英语口语与书写能力。

5、 Knowledge of industrial engineering and manufacturing principles, theories, technologies, and concepts. / 工业工程与制造原则，理论，技术与概念方面知识。

6、Capable of resolving design issues by means of problem-solving methodologies. / 根据问题解决方法论解决设计问题的能力。

7、 Advanced ability to work with computer office applications, e.g. company and customerspecific tools. / 熟练操作办公应用程序，如：公司与客户的特定工具。

8、 Ability to effectively communicate and work within team environment. / 能有效沟通并参与团队合作。

9、 Ability to multi- task and prioritize / 能胜任多重任务，并且区分其轻重缓急。

Supporting on project planning development, collecting and maintaining specific data and KPI needed for project management of any specific project, Ensure external and internal coordination on project management tasks / 协助制定项目计划，收集与维护特定项目的项目管理所需的特定数据，关键绩效指标等，确保在项目管理任务上的内部和外部的交流协作
Main Function Responsibilities and Activities /本职位的主要责任以及职能:
? Support development of project plan and KPI definition / 支持项目计划的开发及关键绩效指标的定义
? To develop Program plans and follow up the project progress in accordance with Program Execution Plan and the agreed upon project goals are realized. / 制定项目相关计划，按执行计划跟踪项目进展，实现已达成的项目目标。
? collect and maintain specific data and KPI needed for project management / 收集与维护特定项目的项目管理所需的特定数据和关键绩效指标
? prepare project regular report to reflect project progress, addressing block points / 准备项目报告反应项目进展状态，识别存在的问题
? Make sure that project progresses in line with schedule, under budget. Make recommendations including corrective action if needed / 确保项目进度与计划及预算的一致，适当提出建议，如有需要可提出纠正措施
? Investigation and communication of issues that can affect project plan / 调查并协调可能影响项目计划的因素
? Be responsible for coordinating and preparing program review meeting (internal/external), minutes drafting and actions following up / 负责协调安排项目相关会议（内部/外部），编写会议纪要及行动项跟踪等
? Define, document and maintain configuration and change management processes (PM level)/定义,记录和维护构型和更改管理流程（项目级）
? Coordination with customer on configuration and change management, including impact (schedule and cost) and change cost tracking /与客户进行构型和更改管理协调，包括影响（进度和费用）及更改费用的跟踪。
? Setting up change impact assessment internally and externally via CCB meeting, managing related coordination record /通过组织CCB会议进行内/外部的更改影响分析，管理相关协调记录
? Managing ECR/ECP, tracking the implementation of changes, providing change implementation status report/管理ECR/ECP，跟踪更改实施状态,提供更改实施状态报告
? Supporting on engineering changes price negotiation (both ENG and MFG)/对工程更改价格谈判给予支持（包括工程和制造）
? Coordinate and deliver program requirements/information to related departments / 协调并向相关部门传递项目要求 / 信息。
? Finish all the assignments by PM / 完成项目经理布置的其他工作
REQUIRED SKILLS AND EXPERIENCE / 本职位所要求的技能及经历:
? Bachelor’s degree in Mechanical, Electrical，or Aerospace Engineering, or Production Administration, or equivalent / 机械，电气，航天工程或生产管理专业学士学位
? Typically has up to 3 year of working experience on project management / 至少3年项目管理工作经验
? Ability to effectively communicate and work within team environment / 有效沟通与团队合作精神
? Advanced ability to work with MS Office computer applications / 良好的运用办公软件能力
? Advanced communication skills (Written and verbal) / 优异的沟通交流能力
? Advanced problem-solving skills / 卓越的解决问题能力
? Fluent in English (Written and verbal) / 流利的英文口语与书面表达能力
? Capacity to analyze / 分析能力
? Capacity to report / 汇报能力
? Proactive who works with minimum supervision and understanding impact of the work / 主动性强，在有限的指导下达成工作目标，理解对工作的影响
? Able to multi-task and manage by priority / 能够多任务按优先级管理
? PMP certificate is preferrable / 持有PMP证

Main Function Responsibilities and Activities / 本职位的主要责任以及职能:
? Ensure timely delivery of product according customer schedule by meeting quality customer requirements / 确保按照客户的时间表按时交付符合客户质量要求的产品
? Management of assigned personal following company targets and human resources SAIFEI process management / 依照公司目标管理指定的人员，以及赛飞的人力资源过程管理
? Manage all tools and equipments assigned following SAIFEI management procedures / 依照赛飞的管理程序管理所有指定的工具和设备
? Ensure the implementation of all activities with the purpose to reach SAIFEI’s KPI goals / 通过实现所有活动来确保达到赛飞公司的各项关键绩效指标
? Lead the analysis and solution of problems affecting the previous results / 负责影响之前结果的问题分析及解决
? Promote teamwork and a good work environment / 促进团队合作精神以及好的工作环境
? Ensure compliance with the rules of work and discipline plan established / 确保遵守工作章程以及已确定的纪律计划
REQUIRED SKILLS AND EXPERIENCE / 本职位所要求的技能及经历:
? Bachelor Degree in Business or Engineering Management / 工商或工程管理本科
? 5 years experiences in aerospace or equivalent manufacturing industry / 5年航空或相关制造工业的工作经验
? 3 years experiences in team management as production supervisor / 3年作为生产主管的团队管理经验
? Written and oral professional English /专业的英语口语及书写
? Good ability for solve problems / 良好的解决问题能力
? Statistical knowledge / 统计学知识
? IE, ME techniques / IE、ME技巧
? 5S, office software, Lean Sigma techniques / 5S、办公软件、精益西格玛技巧

Main Function Responsibilities and Activities / 本职位的主要责任以及职能:
61 Plans, assigns, monitors and measures employee objectives, predicated on overall departmental goals / 根据所有部门目标，计划，分配，监督与评估员工目标。
61 Applies strong engineering knowledge, coaching skills to lead a team of engineers towards complex technical solutions / 应用渊博的工程学知识，培训及领导工程师团队以制定应对繁复技术难题的解决方案。
61 Responsible for contributing to financial objectives by managing process efficiencies, achieving schedule goals, initiating cost reduction activities and corrective actions / 通过对工艺效率的管理，工程计划日程目标的实现，降低成本活动与纠正措施的实施，以上种种来达成财政目标。
61 Perform assigned tasks meeting the organization's expectations for quality, schedule and process compliance / 完成分配到的任务，以达到组织期望的与质量目标，计划表以及程序的一致。
61 Participates in engineering activity within the unit by overseeing, advising others, and by contributing directly to the development of complex solutions, which require ingenuity and innovation / 通过监查，提出建议，以及为解决复杂问题做出直接贡献，来参与公司的工程活动。
61 Support the management of BOM at program/product level / 支持项目级/产品级物料清单的管理
61 Support the development of processes, methods, and tools / 支持工艺，生产方法以及工具的改善提高。
61 Selects best techniques and tools for manufacturing operation after researching options / 经过研究，为生产操作选择最优的技术与工具。
61 Applies program technical requirements into work requirements, processes, and tasks / 把项目技术要求落实到工作要求，程序以及任务中去。
61 Translates program/customer technical requirements into detailed instructions / 把项目/客户的技术要求转化为详尽的指令说明。
61 Interacts with customer-vendors to design and develop specifications / 与客户 – 供应商在设计与开发规格方面进行沟通交流。
61 Maintains process documentation / 维护程序文件。
61 Ensures compliance to customer Engineering and Installation processes / 确保与客户工程，安装工艺的一致性。
61 Keeps appraised of and evaluates new technologies for process improvement through new or enhanced systems, tools, and methodologies / 运用新兴或成熟的系统，工艺以及方法论来评估新技术，从而不断改进工艺。
61 Other duties may be assigned / 其他分配到的任务
REQUIRED SKILLS AND EXPERIENCE / 本职位所要求的技能及经历:
61 Bachelor’s degree in Engineering (Industrial / Manufacturing / Electrical / Mechanical, /Aerospace), or equivalent engineering degree / 工程学学士学位（工业 / 制造 / 电气 / 机械 /航空），或工程专业同等学位
61 More than 5 years of experience in an engineering classification / 五年以上工程类工作经验。
61 2 years Manufacturing Engineering Industry (electrical wiring industry preferred) / 两年制造工程领域的经验 (电气线束领域经验更佳) 。
61 2 years Aerospace industry (preferred) / 两年航空领域工作经验（更佳）。
61 Fluent in English (Written and verbal) required / 流利的英语口语与书写能力。
61 Continuous improvement mindset and / or knowledge of Lean 6 Sigma methodologies /精益六西格玛管理思想和 / 或知识的持续发展。

Main Function Responsibilities and Activities /
本职位的主要责任以及职能
:
·
Conduct building maintenance according to maintenance schedule.
/
根据维修日程计划，实施建造相关维护维修工作
·
Attend and conduct maintenance work orders.
/
参与及实施维修工单
·
Support any building maintenance emergency.
/
任何建造维护的支持工作
Attend and conduct any unsecure building condition
/
任何不安全构造相关活动的参与及实施
REQUIRED SKILLS AND EXPERIENCE /
本职位所要求的技能及经历
:
Technical
school
graduate /
技校毕业
Above
5
years maintenance relevant working experience
/
5
年以上维护维修相关工作经验
MS office
/
微软办公软件
Low voltage certification
/
低电压认证
Trouble shooting skills
/
问题解决技巧

Main Function Responsibilities and Activities / 本职位的主要责任以及职能
61 Develops and maintains wire harness physical design and installation through the use of 3D wire harness installation models, wire harness assembly models and 2D formboard drawings / 通过3D 线束安装模型，线束装配模型与2D 装配板的图纸起草工作，开发与维护线束实际的设计与安装
61 Supports analysis and design reviews / 为分析与设计评审提供支持
61 Perform assigned tasks meeting the organization's expectations for quality, schedule and process compliance / 完成分配到的任务，完成与组织期望的质量，时间表及工艺的一致性
61 Applies program technical requirements to design work requirements, processes, and tasks / 把项目技术要求应用到设计工作要求，工艺与任务中去
61 Supports the development of processes, methods, and tools that support the design process / 为工艺，方法，工具的开发提供支持，助力设计工艺
61 Communicate and/or implement design solutions / 沟通和/ 或实施设计解决方案
61 Investigate and resolve design issues / 调查与解决设计问题
61 Develops solutions to complex problems, which require ingenuity and innovation / 运用***性与创新性开发复杂问题的解决方案
61 Other duties may be assigned / 其他可能分配到的任务
61 Ensure that the tasks assigned are done on time and according to the quality criteria / 按照质量标准，确保分配到的任务被按时完成
REQUIRED SKILLS AND EXPERIENCE / 本职位所要求的技能及经历
61 Bachelor’s degree in Electrical, Mechanical, or Aerospace Engineering, or equivalent / 电气，机械或航空工程相关领域学士学位或同等学历
61 Typically has up to 2 years of experience in an engineering classification / 多达两年的工程类经验
61 Ability to learn and work with MS Office computer applications and Excel VBA/ 学习与运用办公软件与使用Excel VBA的能力
61 Fluent in English (Written and verbal) / 流利的英文口语及书面表达能力
61 At least one full project experience/至少有一次完整的项目经验
61 Experience with 2D and 3D CAD design (CATIA) / 运用CATIA 2D与3D 的设计经验

现场问题解决（制造作业流程之后的问题，M5后的问题）
Troubleshooter follow up of series(after SOP, M5+)
质量数据统计分析，优化改善工艺流程，提升生产效率（提升产量、降低废品率）。
Quatity data statistics and analisys, optimize technological process, drive production efficiency(improve output/reduce scrap rate). "
负责新工艺、新技术的试验工作，并组织制定有关技术规范标准
Responsible for tests of new process and technology. Establish relevant technical standards.
负责协调解决机加工生产中存在的关键技术质量问题.做好现场服务指导
Coordinate to solve major technical and quality problems in machining & assembling. Provide instruction on the spot
负责进行机加工工序的统计过程能力分析和产能分析
Responsible for statistical process capability analysis and capacity analysis of machining & assembling process
完成领导交办的工作
Finish work assigned by leaders
任职要求：
大学机械及相关专业本科或以上学历
University graduate or above，mechanical or related major
练掌握工程制图标准和表示方法，掌握公差配合的选用及标注，掌握公差链的计算方法。
Proficient in engineering drawing standards and presentation methods，Master the selection and marking of tolerance fit，know well about calculation method of tolerance chain."
熟练掌握CNC设备编程及调试技能
Proficient in CNC machine programming and debugging
掌握精益生产和质量改进基本工具
Master the basic tools of lean production and quality improvement
有机械设计的基本知识和技能，能使用Solidworks、Autocad进行夹具、检具、刀具的设计
have the knowledge and skills of mechanical design, and be able to use SolidWorks and AutoCAD to design fixtures ,inspection tools and cutting tools.
质量管理要求：熟悉TS16949质量管理体系
Quality control knowledge: familiar with TS16949 quality control system
环保管理要求：熟悉ISO14001环境管理体系
Environment management knowledge: familiar with ISO14001 environment management system安全生产要求：符合岗位安全承诺要求
Production safety: meet the promised requirements of position safety

华域科尔本施密特活塞有限公司

Duties and responsibilities职责和责任:

1. Set up standard time and optimization, capacity analysis. 建立标准工时并优化，同时做相应的产能分析。

2. Make SOP，training SOP and ensure worker follow the SOP. 制定作业指导书，并培训与监督工人严格执行。

3. Continually improve the assembly quality and efficiency by optimizing the assembly process. 不断优化装配工艺，提供装配质量和效率。

4. Plant layout and plan their evolution. 车间布局与优化。

5. Advance of 5S project, check and optimize. 5S项目的推进，检查，提高。

6. AS work fixture, assembly process, inter process improvement. 装配车间工装夹具，装配工艺，内部流程改善。

7. Quality problem processing and customer complaints analysis to improve 质量问题处理和客户投诉分析改善。

8. Support outsourcing.（SOP，train and cost） 外包项目提供支持(作业指导书，培训，成本分析等)

9. Collection the rationalization proposals from workers then assessment and implementation. 员工合理化建议的收集，评定，执行。

10. Lean production project like VSM , 3P, SW, Visual management, and so on. 精益生产项目推动例如：VSM, 3P,标准作业，目视化管理等。

Requirements任职要求:

1. Be able to work under pressure, open mind and team work. 能够在压力下工作，思路开阔且具有团队意识。

2. 3+ year experience on IE. 3年以上的IE工作经验。

3. Good communication and organization skills, good at planning and follow up strictly 良好的沟通和组织能力，善于计划并严格执行。

4. College or above, good English spoken and written. 本科及以上学历，具备良好的英文读写能力。

博凯机械（上海）有限公司

1、协助工厂产能规划；

2、协助工厂人力精简；

3、协助工厂切拉换型；

任职要求：

1、工业工程或相关专业毕业

2、1年以上IE工作经验优先

3、踏实、肯吃苦，沟通能力强

瑞庭时代（上海）新能源科技有限公司

1、制定各生产工序标准工时&人员配置，分析现状（动作分析、瓶径工序分析、七大浪费排除），制定改善计划；
2、根据产品的要求，负责整厂及产线布局Layout的更新；
3、推进车间现场的各类精益改善活动（6S、物料流的优化、目视化管理、看板管理、防错防呆预防措施的导入、人机工程学、生产效率提升、提案改善）。
4、标准作业指导书的制定、发行、维护及员工培训；
5、针对产品结构，设计相关辅助工装；
6、突破现有状况...

光惠(上海)激光科技有限公司

岗位内容：

1.负责生产车间的规划和布局，确保生产流程的顺畅；

2.实施各项持续改进活动，降低生产成本，提高生产效率；

3.通过精益生产手段，提高生产线效率、减少浪费和库存；

4.参与新产品或设备的引进和调试，提供技术支持。

任职要求：

1.工业工程或机械工程本科及以上学历；

2.熟练掌握Lean制造、6 Sigma、TPM等相关工具和方法；

3.能熟练使用AutoCAD等相关设计软件；

4.较强的组织、协调和执行能力；

5.具备3年以上相关工作经验。

上海佳赛德环保科技有限公司

-编制SOP和过程质量控制文件；并确保文件规定的内容不脱离生产实践，清晰易懂，能在生产过程中有效实现，达到预期效果。
-在规定时间内准备新产品所需的工具或设备。在保证操作安全的前提下，不断优化现有的工装结构，增加通用性，降低成本，降低劳动强度，提高工作效率。
-根据APQA的要求，积极参与新产品的研发，及时制定有效的过程（如说明书、PFMEA等）和过程质量控制文件。
-领导现场重要质量或技术问题的临时发生，深入现场，不断推动问题的解决，尽快恢复生产，确保交付。
-对长期困扰生产（或客户现场）的过程质量或技术问题进行跟踪统计，使用常用的质量工具，计划有效的调查和验证测试，并在现场进行深入实施，从而最终解决这些问题，提高过程质量。并准确记录和归档解决过程。
-编制并有效实施工艺纪律审核计划。每次审计都应该有一份客观准确的报告。
-能够正确理解和使用PDCA、精益生产和六西格玛等持续改进工具，以提高流程能力，减少浪费，提高责任区域的产出。
-掌握项目管理技能，通过培训管理新产品引进。
-为前端销售、客户投诉、供应链和项目管理等其他部门提供技术支持，以提高内部和外部客户满意度。

北京远航英利管理咨询有限公司